JavaScript must be enabled in order for you to see "WP Copy Data Protect" effect. However, it seems JavaScript is either disabled or not supported by your browser. To see full result of "WP Copy Data Protector", enable JavaScript by changing your browser options, then try again.

How Pressure Side Pool Cleaners Work

P ools need regular maintenance, and the cheapest way to do it is to get the brush and the hand vacuum cleaner and get prepared for the job. If your pool is large, this operation can last hours, especially if you are dealing with an algae invasion, which would require more effort. However, if you decide to make a clever investment in a cleaning appliance that can do these tasks instead, you will gain more time and, in some cases, cleaner waters.

The offer is broad enough to allow you to select exactly what you need. If you seek a unit with complete autonomy, you can choose a robotic pool cleaner, which is powered by a built-in motor and comes with an advanced navigation system that allows it to cover the entire surface. Nevertheless, these systems are a bit more expensive and increase your energy bill.

This is why we are proposing a cheaper and more cost-effective alternative, namely a pressure side pool cleaner, which utilizes the pool’s filtering system in a wise way to get itself moving through the water. It is very popular among American pool owners, so maybe it’s time for you to try it too and discover how easy pool maintenance can be.

One way to increase the time between maintenance sessions is to preserve the water clean for longer. Check out our best solar pool covers and add a protective layer over your unit when not in use. They are powered by the sun, so the energy costs are zero.

Pressure side pool cleaner on the side of a pool Image

What Are Pressure Side Pool Cleaners

They are automated pool cleaning devices that connect to the return side of the pump’s system. We have just described them as automated, so what does this mean? It means that you won’t need to be present when they do their job. For better understanding, let’s explain how a unit of this type works:

  1. You attach it to the return pressure line or to a special pressure cleaner line, which is the last component of the filtration system. It has the purpose to send water back into the pool after it has been filtered.
  2. The force of the water pushes the device around the pool, creating suction so that it can gather gunk into a special filter bag. At the same time, the cleaner helps spread the clean water back into the pool.
  3. Additionally, the device loosens debris from the walls and floor, which are either trapped in its filter bag or end up in the main filtering system.

Check out our selection of top-rated pressure side cleaners. One of these models could be your new help in taking care of the pool. Compare filtration capabilities and power, and pick one that can handle the size of your unit.


Types of Pressure Side Pool Cleaners

We have explained how this system works in general, but you will encounter two types of pressure-side pool cleaners. This division is a result of the way these units utilize water force, as not all of them rely only on the pool pump’s pressure. Here are the two types of devices:

Low Pressure Units

These are the classical models, which connect straight to the return line and rely on the pool pump’s pressure to run through the water. They usually require a lower pressure of 15 to 17 psi and come with a larger hose to keep the water pouring at high speed. In some cases, you may need to close all the other water return openings to increase pressure on the device’s side.

The biggest advantage of these units is that they don’t influence your energy consumption, and can run for as long as the filters are on, which should be about 8 hours a day for excellent filtration. They don’t come with a pump, and this means that you won’t need to spend money on maintenance or repairs. Plus, they are cheaper than high-pressure cleaners and much cheaper than robotic devices.

On the other hand, they aren’t a great fit for all pools. For example, they are incompatible with floor return units and are not suitable for small pool filters that have power under 1 hp.

High Pressure Units

These models come with a booster pump that makes them more independent and powerful. To get them installed, the return pipe needs to be cut and prolonged with a Tee fitting. This way, the water that has been cleaned and filtered reaches the pump, which pushes it further through a steadfast pipe. The cleaner gets linked through a hose to this pipe.

Their advantage is that they have timers and can turn on and off automatically, thus saving energy. Plus, they are not affected by factors like clogged pool filters or dirty baskets and manage to preserve good pressure all the time.

If you’ve decided on a high-pressure model, check out Polaris Vac-Sweep 380. Provided with a large filter bag and a tangle-free cord, it is all you need to get rid of algae and pebbles.

Pressure side pool cleaner on the side of a pool Image

The Benefits of Using a Pressure Side Pool Cleaner

  • You will never forget to clean your pool – As these systems are automatic, once you install them, they run through the water, dislodge debris, and vacuum, using water suction. The bag will capture the contaminants and store them until you remove the unit and empty it. However, you should remember that they won’t disinfect the water or clean the filter, so these are still your responsibilities. And you will still need to manually scrub the surfaces once in a while, especially if you are dealing with black algae or other hard to remove contaminants.
  • The pool filter will last longer – Only when you will empty the filter bag for the first time, you will be able to observe how much debris didn’t end up in the main filter. In time, these results will be visible in your pockets, as you will need to replace the filter more seldom and even increase the distance between maintenance jobs.
  • The power consumption will stay low – Low-pressure models are the cheapest to run in this category, and even if they may increase a bit the pressure put on the pool’s pump, they remain one of the most energy-efficient options. High-pressure models come with a pump that requires energy, but they incorporate timers that reduce running time and make them more economical.
  • Easy to install and maintain – In most cases, advanced plumbing isn’t required, especially if you pick a low-pressure model. And when it comes to cleaning them, it all resides in emptying the bag, which should first be left to dry out and only after discharged. This will make the operation much easier.

Pressure side pool cleaner on the bottom of a clean water pool Image

Possible Drawbacks

They do not scrub the walls – Even if they use water pressure to dislodge dirt, they don’t come with brushes and cannot remove stubborn deposits. This means that you will still need to return to the old manual brush. This wouldn’t happen if you would choose a robotic cleaner, which would provide both scrubbing and water filtering.

High-pressure models require extra energy – As they come with a pump, they generate supplementary costs, which often equal the costs of running a robotic model.

They put pressure on the pool’s pump – For a low-pressure model, the pump needs to work harder to propel it around the water. In time, this leads to wear and tear, and to more repair expenses.

They usually leave the water line uncleaned – Most models cannot climb, and this is why debris at the surface of the water isn’t filtered. It will be your job to skim them, even if they aren’t too large.

Pool vacuum cleaners use a similar principle and are highly efficient in pools where algae are a frequent problem. Check out our best vacuum cleaner models and learn how easy it truly is to maintain the water crystal clear.

Man handling the hose of a pressure side pool cleaner Image

Do You Need One? Which Type Would Suit You Better?

One thing is certain: one of these units would make your life a lot easier. But some questions come to mind, don’t they? Is a pressure side model better than a robotic model? And if it is, which option would be the best: the high or the low pressure?

Here’s a little test that will help you decide.

  • Do you need a unit that can do all the cleaning for you and do it fast? – If the answer is YES, then you need a robotic model. It is the only one that offers pool and wall scrubbing, water vacuuming, and waterline cleaning.
  • Do you have a limited budget? – Then you should pick a low-pressure side model. You will get it for less than $500, and you won’t need to pay for installation which can cost you some other $500 for a high-pressure model.
  • Are you looking to reduce energy consumption? – Go for a low-pressure model, which uses your pool’s pump to run and doesn’t require extra energy. Although it may increase power consumption a bit, it is far from reaching the costs of other models.
  • Are you looking for a device that is pretty fast and pretty cheap? – You should pick a high-pressure model, which is cheaper than a robotic model but faster than a low-pressure model.

The Bottom Line

Some users consider automated cleaning devices as essential for pool care, but it is still possible to have an impeccable unit by cleaning it in the old fashion way. Nevertheless, what these devices will help you gain is time, and we seem to be living in an era where time is the thing we lack the most. Investing in a pressure side model will bring you plenty of benefits, starting from the fact that it will keep the water cleaner and take some of the stress that is put on the filter. But the most important is that you will pay less on it than on robotic alternatives and still get a great part of your chores covered.

Lexie Thorne
Lexie Thorne
Lexie is the newest member of the team, previously working for a local business that sold, among other items, robotic vacuums. She takes a keen interest in the latest tech and considers herself to be a veritable tech geek. Using her connections, Lexie makes sure that she always talks to experts when putting together reviews and articles to ensure the information you read is reliable and makes a difference toward aiding you to better understand how automated devices for home use work.

By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.