JavaScript must be enabled in order for you to see "WP Copy Data Protect" effect. However, it seems JavaScript is either disabled or not supported by your browser. To see full result of "WP Copy Data Protector", enable JavaScript by changing your browser options, then try again.

Intex 28005E ZX300 Deluxe

W ith summer in full force, pool cleaning becomes a regular activity, and if you were to do this the old way – with loads of hand-scrubbing, bending over to reach difficult spots, and continuous moving all around the pool – you’d be looking at a few days, a week even, of sore muscles, pulled muscles, and any other pain risk. Why do that to yourself when you could do the smart thing and buy an automated cleaning robot to tend to your pool’s every brushing need?

The Intex 28005E ZX300 Deluxe could be everything you’re looking for and more. It is designed to use your pump for maximum cleaning efficiency, reaching all the nooks and crannies possible in a single afternoon.

Design and Accessories

Although this gadget might look like the miniature version of a lawnmower, what you see in the front (and what is also in the back) are the detachable scrubbing brushes connected to the light blue wheelsets. The rest of the robot is dressed in a grayish white, except for the two parts on the top which match the wheels.
When it comes to the body, its dimensions are 15.75″ x 18.88″ x 16.88″ and its weight is 16.41lbs, which means handling it when setting it up for a pool cleaning process shouldn’t be a difficult task.

Intex 28005E ZX300 Deluxe Image

Check Price at Amazon

Specifications

Intex 28005E ZX300 Deluxe Specs
Pool type Above-ground pools
Floor type PVC liner
Pool size N/A
Cleaning capabilities Floor, Walls, Waterline
Cleaning cycle duration N/A
Hose length 21 feet
Navigation
Programmable
Requirements Filter pump with 1,600-3,500 GPH flow rate
Weight 16.41lbs
Warranty
Check Price at Amazon

Intex 28005E ZX300 Deluxe Picture

Check Price at Amazon

Cleaning Performance

This Intex cleaner is made only for above-ground pools that have PVC liners. It is not suitable for pools that have inflatable top rings, or easy set ones from the same manufacturer. It works for both chlorine water and saltwater pools.
Keep in mind that in order to use it, you will need a filter pump with a flow rate between 1,600 and 3,500 GPH since it has a 700 GPH water-powered suction.
The 21 feet long and 4-inch thick non-tangle hose allows the robot to easily reach the entire average pool surface. The floor, the walls, and even the waterline are all included and covered in a single cleaning cycle.
The whole process of ridding your pool of unwanted debris is done with the help of two things:

  • Water pressure cleaning
  • Water-powered rotating dual brushes

To start, you hook the robot to the water inlet and let the robot wheel around to make your water as clean as ever. The dirt scrubbed by the brushes is caught by the Fine 0.15mm mesh filter and the debris is collected in the 1.8L capacity container basket.


Check Price at Amazon

Ease of Use

Overall, this robot is easy to use, since all you need to do is connect it to your pump and it will do what is required of it.
If anything seems off with its movements, do check the inside of the device to see if its tubes are lined up accordingly. Also, do a backwash of your filters (reverse the water flow), for the robot to have clean ones to work with. Otherwise, it might go slow or not clean as well as it could. If you have stairs attached to a pool wall, check to see if there’s enough space for the robot to move behind them, and if not, remove them for the duration of the cleaning cycle.
For pools with heavy debris (leaf piles, pebbles) brush removal is recommended for the first cleaning so as to not get garbage stuck in the bristles.

When cleaning it after a pool routine you’ll have to:

  • Take it out of the pool (with the help of the conveniently placed handle on top)
  • Detach the hose connected to the pump
  • Open the cover
  • Take out the removable basket and empty it of debris
  • Rinse the robot

This way you’ll have it squeaky clean, ready for its next use.

Operating Costs

Given that the ZX300 Deluxe operates using the pump, there’s no extra electricity cost caused by plugging in cables or batteries that need to be charged. The broad coverage of the floor, walls, and waterline is also a good thing cost-wise because you won’t need to invest in multiple products.
The only cost will be the initial purchase of this below $200 cleaner, and if maintained properly, there are no repair costs.

Good news all around for this chic above-ground pool cleaner.

Warranty and Support

Although Intex does not offer a warranty for their products because of the thorough checking of materials and manufacturing process before the product leaves their factory, they do offer a 90-days return policy should an issue arise or if you have been shipped an incorrect model.
To benefit from this policy you must report any issue within 15 days of receiving your product and make sure it returns to their address within 30 days from the same date. Pack the product in the original packaging that has not been previously damaged. The return and shipping fees are not covered.
If all conditions are met you will either receive your money back or have the product replaced.

For any further inquiries, contact the Intex team using their online form or the phone number provided on their website during the Monday to Friday, 8:30 AM to 5 PM PST schedule.

Conclusion

The bottom line is, if you have an above-ground pool and you need a helping hand with all the cleaning required for a healthy swimming environment, get the Intex 28005E ZX300 Deluxe.
The pump will help it do the work, and the robot will help you do the work, so it’s a win-win situation for everyone involved.

Linda Tauson
Linda Tauson
With a PhD in communication and several years of experience in journalism, Linda is no stranger to the written word. Since she takes a lot of interest in technical topics, researching new products and tech, and likes to shop for anything that can help make her life easier at home, she is a valuable source of information when it comes to robot vacuums and similar devices. Linda is a connoisseur due to her personal experience with these products, and our main source when we discuss this specific niche.

By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close