JavaScript must be enabled in order for you to see "WP Copy Data Protect" effect. However, it seems JavaScript is either disabled or not supported by your browser. To see full result of "WP Copy Data Protector", enable JavaScript by changing your browser options, then try again.

10 Best Rated Motorcycle Lift Tables – In-Depth Reviews

W hether you are a motorcycle devotee or own a professional garage that handles maintenance and repairs for these vehicles, there’s one thing you must admit: getting them fixed can be a real struggle if you don’t own the proper tools.

Thus, for every motorcycle enthusiast out here, we have gathered the best motorcycle lift tables available online and in stores. They have certain similarities, but they also differ in terms of weight capacity, lift type, elevation height, and so on. Our purpose is to help you get the most suitable table for your bike. See the comparison table and read the reviews to find what’s trending today and what’s dependable.

See here the best car lifts of the moment if you are thinking to start servicing your car at home. Our article includes a selection of 4-post, 2-post, and scissor models with different weight capacities and a detailed buying guide that will help you decide.

Top 10 Motorcycle Lift Tables Comparison

Photo Product Lifting Mechanism Weight Capacity Min. Lift Height Max. Lift Height Side Extensions Casters Warranty Price

Best Overall
1. Tuxedo M-1500C-HR Air/Hydraulic 1,500 lbs. 6-3/4″ 38-1/2″ 2 1-year warranty on labor; 5-year warranty on parts and structural components Check Price at Amazon

Editor’s Choice
2. Black Widow BW-550 Hydraulic Hydraulic 1,500 lbs. 6.75″ 33.5″ 1 year Check Price at Amazon

Best Commercial Lift Table
3. APlusLift AP-MT1500X Pneumatic 1,500 lbs. 7″ 33″ 2 2 years on parts Check Price at Amazon

Best for Harley
4. Black Widow ProLift Pneumatic 1,500 lbs. 7″ 31.25″ 2 1 year Check Price at Amazon
5. Vestil MOTO-Lift-1100 Hydraulic 1,100 lbs. 7″ 32″ 3 months Check Price at Amazon

Best for the Money
6. Titan Ramps 1,000 lb Hydraulic 1,000 lbs. 8″ 33″ 2 1 year on parts Check Price at Amazon
7. Roughneck PML-1027 Hydraulic 1,000 lbs. 7″ 30″ 4 N/A Check Price at Amazon
8. Generic Hydraulic Bike Motorcycle Lift Table Hydraulic 1,000 lbs. 8″ 29″ 4 N/A Check Price at Amazon

Best for Small Motorcycles
9. Extreme Max 5001.5083 Hydraulic 300 lbs. 13.25″ 34.5″ 4 N/A Check Price at Amazon
10. Pit Posse Scissor Lift Table Hydraulic 300 lbs. 13″ 36″ 4 2 years Check Price at Amazon

Drive your motorcycle directly into the yard without losing time at the gate. Here is a selection of the most reliable automatic gate openers that are ready to open the gates at your command.

1. Tuxedo M-1500C-HR

Check Price at Amazon


Specifications:

  • Construction: Heavy-duty diamond steel plate
  • Platform Size: 88.5” x 31.5”
  • Lift Type: Air/Hydraulic
  • Weight Capacity: 1,500 lbs.
  • Minimum Lift Height: 6-3/4″
  • Maximum Lift Height: 38-1/2″
  • Service Jack: Optional
  • Approach Ramp:
  • Side Extensions:
  • Casters: 2
  • Shipping Weight: 462 lbs. / 616 lbs.
  • Warranty: 1-year warranty on labor; 5-year warranty on parts and structural components


It offers a nice blend of functionality and dependability, being one of the most powerful units on the market. Oversized and able to sustain all forms of bikes, varying from the lightweight dirt models to the heavier cruisers and tourers, but also a nice fit for lifting ATVs or lawnmowers, it is a great pick for heavy jobs.

Fit for Commercial Use

It is built of heavy-duty diamond plate steel, which makes it resistant against wear, but also heftier and, thus, stable. This toughness is sufficient to make it fit for any professional garage. Nonetheless, the engineering behind it and a series of features and accessories turn it into the best one for this type of job:

  • Scissor frame – it offers steadiness during the lifting process, as this structure can better absorb vibrations. Plus, it proves more resistant in time compared to other arrangements.
  • Extendable platform – the stand is already extra-large, measuring 88.5” in length and 31.5” in width. Nonetheless, it may not be sufficient for bulky vehicles, or you may be left with limited working space. In this case, you can use the included extensions that will enlarge it on the laterals with 28.5 inches to a peak width of 30”. Furthermore, when working on long vehicles, you can also add a 13” front extension (not included) and ensure that the bike is well-positioned.
  • Integrated drop-out panel – it will help you get the vehicle on the stand without effort. And, the good news is that it is detachable, a property that will prove handy if you need to store the table.
  • Variable height – it can be lowered to 6-3/4”, lower than what most models can offer, therefore you won’t struggle to place the vehicle on the table. Moreover, the peak height is 38-1/2”, so you will be able to work on your motorcycle from a comfortable position.
  • Professional pump – it is the one doing the heavy work, and in this case, you get a professional air/hydraulic pump that comes with a case so you can keep it protected. It operates at a pressure of 116 to 145 psi.
  • Large capacity – it isn’t enough for the stand to be wide but it must be able to sustain the heaviness of a large bike. This unit can hold up to 1,500 lbs., hence it enters the heavy-duty, professional category.
  • Casters – the heaviness of the unit makes it challenging to reposition. Thus, the manufacturer added 2 casters and made this job easier for you.
  • Service jack (optional) – you will need to pay extra for it, but it can add 3.75” to 15.75” to the height.
Generous Service Contract

The company made no cuts regarding the warranty, and, thus, you receive 5 years for the structural components and other parts and 1 year for workmanship. Nonetheless, with such a heavy construction that has been powder-covered and presents a diamond finish, the chances of it getting easily wrecked are minimal.

PROS

  • Includes casters for easy repositioning
  • Offers a great elevation height
  • Generous service contract
  • The air/hydraulic pump enables a smooth operation
  • Features a powder-covered diamond treat finish

CONS

  • The front extensions and the service jack are not included
  • Very heavy structure


Verdict

Although you will pay good money for it, it supplies a solid lift and commercial features. It is covered by a long services contract and is pretty easy to use. Furthermore, most accessories are included and are all high-quality, so it is versatile enough to serve as a stand for a multitude of vehicles.


When it comes to home security, never leave anything to chance. Check out the most appreciated belt and chain garage door openers on the market and add a great protection mechanism to your garage that can help you keep your tools safe.



2. Black Widow BW-550 Hydraulic

Check Price at Amazon


Specifications:

  • Construction: Powder-coated steel
  • Platform Size: 78” x 47”
  • Lift Type: Hydraulic
  • Weight Capacity: 1,500 lbs.
  • Minimum Lift Height: 6.75″
  • Maximum Lift Height: 33.5″
  • Service Jack:
  • Approach Ramp:
  • Side Extensions:
  • Casters:
  • Shipping Weight: 540 lbs.
  • Warranty: 1 year


For any home garage and even for professional works, a Black Widow is definitely the right choice. The model we’ve selected is one of their largest, presenting a heavy-duty steel construction that was powder-coated to resist scratches and keep the rust away. It is an excellent pick for large motorcycles that can be loaded with ease on it and lifted smoothly to the desired height.

High-Capacity Lift
  • Hydraulic power – this arrangement offers the simplest and most reliable operation. The mechanism is based on an air pump and a lifting cylinder that is activated by the pumping of hydraulic fluid. To put it simpler, when you push the integrated foot pedal, the air gets sent to the pump, which pushes the liquid into the cylinder, making the scissor mechanism extend and lift the vehicle. It requires a minimum of 90 psi.
  • Generous steel platform – while this model doesn’t come with side extenders, the platform is large enough for bulkier motorcycles. It measures 78” in length and 47” in width and has a diamond plate steel surface that ensures the vehicle doesn’t slip during the repairs. The heavy structure allows you to lift bikes weighing up to 1,500 lbs.
Improved Stability
  • Low collapsed height – the 6.75” minimum lift height makes it easier to get the motorcycle on the table and lift it to a maximum height of 33.5” that will allow you to do your job from a comfortable position. This model also integrates a loading ramp with a length of 24” and a width of 47”, which can be detached once the vehicle is on the table so it doesn’t get in the way.
  • Easy access to the wheels – once the motorcycle is on the table, you can drop the rear panel and get started with maintenance work or repairs that require access to the wheels. The panel has a width of 20” and a length of 18”.
  • Front-wheel clamp – this is one of the safety features this model offers, as it allows you to secure the front wheel so the vehicle doesn’t slide or fall from the table. It offers better stability as well, allowing you to concentrate on the job and not get distracted by the vehicle starting to wobble.

In case you need to position the table on a slightly uneven surface, it comes with threaded levelers at the front that allow you to lower or elevate this side until you get the desired stability. Unfortunately, there are no wheels included, which makes this model quite difficult to move, especially as it weighs over 500 lbs., so you will need a second hand when trying to find a new spot for it. The warranty offered by the manufacturer is 1 year.

PROS

  • Heavy-duty build allows it to lift heavy motorcycles
  • It is simple to position the bike on the table due to the loading ramp and low collapsing height
  • Wheel clamp on the frontal side helps secure the motorcycle by the front wheel
  • Dependable hydraulic mechanism
  • Drop-down panel allows you to change the tires with ease

CONS

  • No side extensions included
  • The warranty is quite short considering the high price


Verdict

This is a long-lasting investment that can be used both in a home garage or a professional motorcycle repair space. The structure is all-metal and powder-coated for better protection against rust, and it comes with a strong hydraulic system that allows it to lift heavy motorcycles smoothly. Although there are no side extensions included, the table is quite wide, so you won’t have any problem fitting even a Milwaukee-Eight 114 on it.


A professional garage can never afford to run out of power. And neither a home one, if we think about it a little. We recommend making a good backup plan in case of blackouts and installing a standby generator near your house or place of business so you can stay covered in case the situation extends over multiple days.



3. APlusLift AP-MT1500X

Check Price at Amazon


Specifications:

  • Construction: Thick-gauge steel with E-coated black paint finish and powder-coated orange paint finish
  • Platform Size: 84” x 24”
  • Lift Type: Pneumatic
  • Weight Capacity: 1,500 lbs.
  • Minimum Lift Height: 7″
  • Maximum Lift Height: 33″
  • Service Jack:
  • Approach Ramp:
  • Side Extensions:
  • Casters: 2
  • Shipping Weight: 600 lbs.
  • Warranty: 2 years on parts


With an exceptionally built structure featuring 1/8” steel thickness and covered with resistant black paint, this unit is fit both for a home garage and professional use. The orange part on the stand is powder-covered for more resistance, as more pressure is put on this area. The scissor system allows it to lift vehicles with a mass of up to 1,500 lbs. while preserving the utmost safety standards. The peak height it can reach is 33” thus, you’ll get to stay comfortable while doing the required repairs, but it also gets as down as 7”, allowing you to load the vehicle on the platform with ease. The detachable approach ramp will also help a lot as it offers you 20” by 24” of inclined surface and lowers the strain on your muscles.

The stand is generous, measuring 84 inches in length and 24 inches in width. But this isn’t all, as this model comes with extensions, allowing you to bring the stand’s length to 110” and the width to 48”. Besides, it presents multiple locking points, so you can set the height rendering your needs. You just need to bring it into the right position by operating the pneumatic mechanism with your foot.

A nice extra is the free service jack that comes with it. With a peak weight capacity of 1,000 lbs. and a height span of 3.5” to 15”, it can also be included in the class of professional tools. Besides, the unit is backed by a 2-year service contract, which is among the most generous available at the moment.

PROS

  • The powder-covered finish extends its durability
  • Features an 11-1/8 inches thick metal gauge
  • Front extensions can accommodate longer bikes
  • The ramp presents a low angle for easily loading the bikes
  • The system can be locked in 7 different position

CONS

  • Very heavy
  • The pedal doesn’t present a neutral position


Verdict

It is solid, easy to operate, and very convenient, with a low collapsed weight and a solid approach ramp that allows you to position your motorcycle on it with ease. It comes with many helpful features and includes all the essential instructions. The only drawback is that it is very heavy.



4. Black Widow ProLift

Check Price at Amazon


Specifications:

  • Construction: Powder-coated steel construction
  • Platform Size: 8′ 9.5″ L x 48″
  • Lift Type: Pneumatic
  • Weight Capacity: 1,500 lbs.
  • Minimum Lift Height: 7″
  • Maximum Lift Height: 31.25″
  • Service Jack:
  • Approach Ramp:
  • Side Extensions:
  • Casters: 2
  • Shipping Weight: 236 lbs.
  • Warranty: 1 year


It is built of heavy-duty steel and has a mass limit of 1,500 lbs. You can lower it to 7” and raise it to 31.25 inches. The wide 105” x 48′′ platform can accommodate large vehicles with ease, and the kit includes 2 side extensions that add supplementary space, being a great choice for various bikes, ATVs, lawnmowers, etc. The loading ramp measures 20″ x 48″.

For more convenience, the mechanism includes a center jack that extends from 4″ to 15”, as well as eye-rings and a rear drop-out panel you can collapse when you need to change the tires or do other repairs that require access to the wheels. Just like most lifts, it integrates a front wheel chock that allows securing the motorcycle on the platform and getting more stability while doing the repairs.

The dolly handle and the 2 front rollers are also a great addition as they allow you to maneuver the unit with ease. The pneumatic power system requires between 90 and 110 PSI and is actioned by foot. The unit is warranted for 1 year.

PROS

  • High-quality black paint finish
  • The side panels can be detached
  • Wide platform
  • Easy to put together and operate
  • Comes with an integrated adjustable wheel chock

CONS

  • Short warranty
  • The assembly instructions are poorly written


Verdict

Nice option, although a little bit more expensive. It comes with pretty much all you need to fix your vehicle in your garage. Easy to manage and reposition and can accommodate long bikes. However, considering the price, it should’ve been covered by a longer service contract. In what concerns the instructions, they need some improvements.



5. Vestil MOTO-Lift-1100

Check Price at Amazon


Specifications:

  • Construction: Heavy-duty steel
  • Platform Size: 86.5” x 35”
  • Lift Type: Hydraulic
  • Weight Capacity: 1,100 lbs.
  • Minimum Lift Height: 7″
  • Maximum Lift Height: 32″
  • Service Jack:
  • Approach Ramp:
  • Side Extensions:
  • Casters:
  • Shipping Weight: 517 lbs.
  • Warranty: 3 months


Vestil offers a heavy-duty model that can easily lift motorcycles with a weight of up to 1,100. Thus, it would make a nice acquisition both for amateur and professional bikers who are looking for a reliable machine that can lift and hold their vehicles during maintenance works. It is designed to be operated with ease and comes with a non-automatic pump that can be actioned with the foot and which will activate the pneumatic system and send the table up to 32” high.

Getting the vehicle on the table is an easy job, as the platform lowers down to 7” and comes with a fold-down approaching ramp, forming an obtuse angle that isn’t difficult for the bike to climb. The platform is a bit narrower at 35” and doesn’t come with side extensions, but this model is mainly designed for medium-sized motorcycles, so the space is sufficient. The length of the table is optimal at 86.5”.

To secure the bike on the platform, it comes with a front tire cradle that is compatible with tire sizes up to 6”. You have handles on the sides that will allow you to strap your vehicle and get even more stability before starting the repairs. Another element that helps ensure a safe work environment is the heavy-duty base frame, which has a length of 65” and a width of 26-3/4”. The only downside we could found is that this model doesn’t come with casters, although it does weigh over 500 lbs., but the good news is that you can add a set if you want to.

PROS

  • Easy foot-actioned mechanism
  • Wide and robust base provides improved stability
  • Can be lowered down to 7” and comes with a ramp for easy bike loading and unloading
  • Good weight capacity
  • Steel construction that is resistant to wear

CONS

  • No casters
  • The warranty is only 3 months
  • The table surface doesn’t have the diamond pattern that offers improved adherence


Verdict

This table is ideal for servicing medium-sized bikes and comes at a good price that fully reflects the high quality of the materials and welds. It is operated by a hydraulic system that works smoothly to elevate the vehicle up to 32”. Even if the platform isn’t patterned to offer better gripping, it comes with a wheel cradle and handles for strapping the vehicle.



6. Titan Ramps 1,000 lb

Check Price at Amazon


Specifications:

  • Construction: 11 gauge steel with diamond surface
  • Platform Size: 81-1/4″ x 21-3/4″
  • Lift Type: Hydraulic
  • Weight Capacity: 1,000 lbs.
  • Minimum Lift Height: 8″
  • Maximum Lift Height: 33″
  • Service Jack:
  • Approach Ramp:
  • Side Extensions:
  • Casters: 4
  • Shipping Weight: 294 lbs.
  • Warranty: 1 year on parts


If you’re looking for a lighter table that can support loads up to 1,000 lbs., you can go with this model. Since it is made of steel and presents a diamond-plate surface, the system is very stable. It is narrower and shorter than the other models selected by us, with a table length of 81-1/4” and a width of 21-3/4, so it is a better fit for smaller bikes. The peak height it can reach is 34 inches, while the minimum height is 8.5”.

What we like about this model is the 2-pedal hydraulic system. The lift pedal gently raises the table while the release pedal slowly lowers the table at the desired height. For securely keeping the vehicle in place, the lifting system includes a front-wheel vise and a stop plate. You also get tie-down access ports that will allow you to strap your bike to the table and secure it better so it doesn’t wobble while you are doing the repairs. The rear panel can be folded down to offer access to the wheels.

It comes with 4 casters positioned on the front, which make it easier to move, although it is already considerably lighter than other models at 293 lbs. Unfortunately, it has no side extensions, so it may be difficult to get a bulkier bike on it. When it comes to warranty, this model is backed by a 1-year service contract, which is offered for the parts.

PROS

  • Lightweight and compact design
  • Comes at a reasonable price
  • Includes 4 wheels for a hassle-free transportation
  • Features 1 lift pedal and 1 release pedal
  • Made of heavy-duty 11 gauge steel

CONS

  • Short warranty
  • Doesn’t include side extensions


Verdict

This is among the most affordable models on our list. It’s worth considering if you have a smaller bike as is less generous in terms of working space. Straightforward, lightweight, and hardwearing. It comes with a striking red finish. The only drawbacks are the short service assurance and the fact that it has no side extensions.



7. Roughneck PML-1027

Check Price at Amazon


Specifications:

  • Construction: Heavy-duty steel
  • Platform Size: 86-1/2” x 26-3/4”
  • Lift Type: Hydraulic
  • Weight Capacity: 1,000 lbs.
  • Minimum Lift Height: 7″
  • Maximum Lift Height: 30″
  • Service Jack:
  • Approach Ramp:
  • Side Extensions:
  • Casters: 4
  • Shipping Weight: 337 lbs.
  • Warranty: N/A


This model is made by Roughneck, which is already a renowned brand name in the industry, and can hold up to 1,000 lbs, being a nice choice for lifting small and medium-sized bikes. The peak height lift of 30” allows you to easily work on your motorcycle or other recreational vehicles. It presents a foot-actioned hydraulic pump that can elevate the platform to the preferred height.

The platform can be lowered down to 7” so the vehicle can be loaded with ease. It doesn’t need more than 20 seconds to reach the full lift height. Moreover, it is equipped with a mechanical locking safety system that presents 2 locking points and comes with a diamond-patterned platform that will prevent the vehicle from sliding and allow you to do your job in ideal safety conditions.

For more convenience, the lifting system incorporates a wheel vise, a rear drop panel, and a loading ramp. To quickly move it around the garage floor, the table offers 2 swivel and 2 fixed casters. Additionally, it features a 7-inch wide tire stop and a leg lock and locking bolt to enhance its solidity. It also comes with 2 eye rings. For this model, there are no side extensions included.

PROS

  • Has 4 casters that allow you to easily move it around
  • Foot-actioned hydraulic pump works smoothly and quietly
  • Diamond plate steel platform guarantees better stability
  • Needs only 20 seconds to reach full height
  • Easy to move around due to the 4 built-in casters

CONS

  • Lower weight capacity
  • No side extension


Verdict

Nice option at a reasonable price. It is budget-friendly and works for various motorcycles and small recreational vehicles. Features an easy operation, and you can reposition without difficulty. It is light and compact. Nevertheless, it has no side extensions, which means it is suitable mostly for narrower vehicles.



8. Generic Hydraulic Bike Motorcycle Lift Table

Check Price at Amazon


Specifications:

  • Construction: Heavy duty 11 gauge steel
  • Platform Size: 83” x 13-1/2”
  • Lift Type: Hydraulic
  • Weight Capacity: 1,000 lbs.
  • Minimum Lift Height: 8″
  • Maximum Lift Height: 29″
  • Service Jack:
  • Approach Ramp:
  • Side Extensions:
  • Casters: 4
  • Shipping Weight: 193 lbs.
  • Warranty: N/A


With a sturdy design and multiple built-in features, this is another reliable option to consider. It allows you to change oil and repair your motorcycle without having to crawl on the garage floor. It is made of diamond plate steel and can support motorcycles or bikes with a peak mass of 1,000 lbs. To move it with ease, even when the vehicle is on the table, it has 2 turning wheels in the front – of 3.5” each – and 2 retractable casters in the back – of 1.5” each.

It is 26.6” wide and 87” long (without the loading ramp that is 26” long). The ramp has 2 mount pins and is detachable. The peak and lowest height it can be lifted at are 29 inches and 8 inches respectively. Moreover, the kit includes a service jack that will give you some extra inches from the platform if you need to do more complicated repairs.

It presents a rear drop-out panel to get fast and easy access to the wheel as well as a 7-inch tire stop. The hydraulic system is reliable and easy to operate as you will only need to press the pedal with your foot to make the platform elevate.

PROS

  • Features a foot-actioned pump for easier use
  • It is equipped with a leg lock for safe repairs
  • Includes a tire stop that is 7 inches wide
  • Equipped with 4 casters to easily move it around
  • Made of diamond plate steel

CONS


Verdict

The table is a long-term option for both small and medium-sized vehicles. It is safe to use and comes in a nice red color. A great addition to any garage due to the diamond patterned surface that improves tire adherence and makes the repair works easier and safer.



9. Extreme Max 5001.5083

Check Price at Amazon


Specifications:

  • Construction: Heavy-duty steel
  • Platform Size: 16.25” x 13.25”
  • Lift Type: Hydraulic
  • Weight Capacity: 300 lbs.
  • Minimum Lift Height: 13.25″
  • Maximum Lift Height: 34.5″
  • Service Jack: Optional
  • Approach Ramp:
  • Side Extensions:
  • Casters: 4
  • Shipping Weight: 70.55 lbs.
  • Warranty: N/A


This table is more compact in comparison to the others, so it occupies less space in your garage. Nonetheless, it is not suitable for heavy vehicles as it can only handle a peak weight of 300 lbs. Therefore, you can only use it with small motorcycles and dirt bikes.

The stand measures 16.25 x 13.25 in. and is padded with rubber that will protect your bike from getting scratched. Raising and lowering it is very easy as it presents a foot pedal that allows you to elevate the bike to a peak height of 34 inches. You can also lower it down to 13.25” so you can easily position the center of your vehicle on the platform.

For safety reasons, it features a locking bar that prevents any possible drops in case the release pedal is pressed by accident. The table features a sturdy structure, and the red paint finish is very resistant. To reposition it with ease, it has 4 caster wheels. Last but not least, all the necessary hardware is included.

PROS

  • The casters allow for repositioning
  • Simple and smooth use with the foot pedal
  • The platform is padded with rubber, which offers extra protection
  • Can be locked at the preferred height to avert accidental drops
  • Compact design

CONS

  • Not suitable for heavy vehicles
  • Doesn’t include the assembly instructions


Verdict

Good option if you’re looking for a compact yet powerful unit. It is ideal for small motorbikes, as well as ATVs, and it is very easy to action. The price is also reasonable, especially for such a hard-wearing structure that comes with a reliable safety mechanism.



10. Pit Posse Scissor Lift Table

Check Price at Amazon


Specifications:

  • Construction: Heavy-duty steel
  • Platform Size: 13-3/4” x 16”
  • Lift Type: Hydraulic
  • Weight Capacity: 300 lbs.
  • Minimum Lift Height: 13″
  • Maximum Lift Height: 36″
  • Service Jack:
  • Approach Ramp:
  • Side Extensions:
  • Casters: 4
  • Shipping Weight: 66 lbs.
  • Warranty: 2 years


Equipped with a hydraulic system that can reliably lift a 300-lb. bike, this model is a nice choice if you only need to service smaller motorcycles. It is made from heavy-gauge metal with a patterned platform that comes with a square hole in the middle specially designed to let the oil collect into a recipient and not spread on the table or leak on the floor. The table measures 13.75 x 16 in. and is shielded with rubber that makes it resistant to oil and gas.

To use it at a convenient height, you can adjust it from 13″ to 36” off the ground, which gives you a low enough position to securely load the bike and a high enough position for you to be able to work comfortably.

The bike is well-secured on the stand with both wheels in the air. For extra safety, it presents loops and pins that help you tighten it. The table also features caster wheels that increase the overall stability and allow you to reposition it with ease. It is warranted for 2 years but, in case you are not satisfied with its functioning, you can ask for a full refund.

PROS

  • Foot-actioned lift to easily adjust it to the preferred height
  • Stable and sturdy design
  • Rubberized top with rectangular drain hole
  • Safety loops and pin for extra safety
  • Integrated caster wheels solve the repositioning problem

CONS

  • The platform is not very wide
  • Poor instructions


Verdict

Compact yet robust, it is perfect for a small shop. It is easy to move around, it presents an adjustable height, and it is very stable. Moreover, it comes at a good price and includes a long warranty that will spare you of extra expenses in case the product gets damaged under normal use condition during the first 2 years.



Buying Guide


After reviewing every lift table, let’s see which are the most important aspects you need to consider before deciding upon a model. These aspects also helped us rank the lifting systems and decide which are the best models to buy.

  • Length & Width

    This is valuable information, and you should take it into account. If you intend to use the table for larger bikes, then you need a generous stand that can safely seat the vehicle. From this point of view, the most versatile models are APlusLift and Black Widow ProLift. The first one has a length of 84”, which can be increased up to 110”. The regular width of this table is 24”, but it can be expanded up to 48”. The second model is 105.5 long, and the side extensions can deliver a working width of up to 48”. The model is made by Titan Ramps is more compact and is recommended for smaller bikes. It is only 81.215 long and 21.75 wide.

  • Material

    Motorcycles are heavy vehicles, so the overall build of the mechanism has to be stable to allow you to work with confidence. For this reason, the material used for manufacturing the table plays a significant role. Most brands opt for steel. This material is not only solid but also very durable. It can handle heavy-duty vehicles with ease, providing, at the same time, stability when performing elaborate works. Luckily, all the models selected by us are made of steel.

  • Capacity

    We selected units that can handle all sorts of bikes. Some of them can accommodate vehicles up to 1,000 pounds, while others are more generous from this point of view and can handle heavy vehicles of up to 1,500 lbs. (Tuxedo M-1500C-HR, Black Widow BW-550 Hydraulic, APlusLift AP-MT1500X, Black Widow ProLift). Nonetheless, we see no reason why you should buy a high-capacity system if you have a light vehicle. Extreme Max is a nice fit for smaller bikes as it can handle a peak of 300 lbs.

  • Minimum & Maximum Lift Height

    All the systems selected by us feature adjustable height. This adds more convenience as you can elevate or lower the table according to your needs. Most of them can be lowered to 7 inches, except for Tuxedo (6.75”), Black Widow BW-550 Hydraulic (6.75”) and Titan Ramps (8.5”). As for the peak lift height, the most versatile is Tuxedo, which can be lifted to 38.5 inches. Generic Hydraulic Bike Motorcycle Lift Table is less generous from this point of view as it can be elevated to a peak of 29 inches.

  • Side Extensions

    They offer a more generous platform, and they are very useful if the vehicle you’re working at is larger. Nevertheless, if your bike is smaller, a table that features an extension will only cost you more money. For example, Titan Ramps and Roughneck have no side extensions. Therefore, they are more affordable, while being more compact and lightweight. If you’re looking for a model with plenty of extension space, then you can consider APlusLift. This model comes with side and front extensions that allow you to customize the platform size according to your preferences. Conversely, Tuxedo comes with an optional front extension that can be bought separately.

  • Warranty

    Most people neglect the service contract of the products they buy, but we consider it very important. The winner of this category is Tuxedo. It is covered by a period of 1 year on labor and 5 years on parts and structural components. It is followed by APlusLift, which is backed by a 2-year assurance on parts. Black Widow and Titan Ramps are covered by a 1-year warranty.



Safety Tips


Regardless if you’re an amateur or a professional mechanic, you should always follow these safety tips.

  • Make sure the vehicle is secured to the lift:

    Before you raise the mechanism, check if the motorcycle is secure. The wheel vise has to be tight. Use extra straps if necessary.

  • Make sure all the surroundings are clear:

    Before pressing the lift pedal take a look around to see there’s nothing around that may get hung up to the table and tip its balance. Raise the vehicle slowly. When the repairs are done, do not lower that table until you remove all the tools or machines you’ve used from under the table.

  • Keep away from the lift any portable stool:

    If you use a stool to help you raise and work on something that may be above your reach, make sure you remove it from around the lift. Otherwise, when lowering the system, it may hold one side of the table up while the other side will keep lowering and the vehicle may tip over on you.

  • Keep the working surface clean and dry:

    Remove any type of oil under the rear tire as the vehicle can shift side to side and fall off the lift.

  • Don’t skip the regular maintenance:

    If you want to extend the life of the lift, make sure you perform the regular maintenance. Always keep the locking nicks free of debris.

  • Put the rear drop-out panel back:

    If you remove the back drop-out panel to have access to the rear wheel, make sure you put it back on once you finish the work.

  • Don’t try to move the bike when it is on the lift:

    Always lower the stand before doing this.

  • Use the mechanic lift:

    This will give you some extra height, lifting the interest area of the bike to your eye level and offering you better access to the wheels and the vehicle’s underneath.

  • Be careful:

    Always pay attention to your next move as prevention is the best safety solution.


Frequently Asked Questions



Are tie-downs really necessary?
The tie-downs are an extra safety measure. They offer peace of mind and help prevent any kind of incident. Nevertheless, when you’re performing simple work like changing the tires, you don’t necessarily need tie-downs, although you may consider them. However, when it comes to mechanical work, it’s strongly recommended to tie down the bike to keep it secured. Usually, the tie downs are not included with that lift table, but you can always buy them separately.

Are pneumatic tables better than hydraulic ones?
Not necessarily, but there are certain differences between the air and hydraulic lifts. The air lift is cheaper, which makes it more commonly used. The air cylinder is started by a foot-operated valve that helps lift the table very quickly. Instead, the hydraulic lifts include an air pump that presses hydraulic fluid into the cylinder. Just like the air lift, it is actioned by a foot pedal. The hydraulic lift provides a smoother operation.

How many PSI do pneumatic lift tables require?
In general, this type of lift requires around 100 PSI. For accurate air requirements, we advise you to check the instructions offered with the lift table.

Do these tables work for lifting commercial power tools?
Yes, as long as the weight of the power tool doesn’t exceed the peak weight recommended by the manufacturer. So, make sure you carefully read the specifications before using the lift.

Are the side extensions as strong as the table?
In general, the tables are tested with side extensions, so they are safe to use with the recommended peak weight.

How high does a motorcycle lift go?
The lowest height is 2.5” and the lift can reach 30”+, depending on the model.

How much does a motorcycle lift table weigh?
This question concerns storage, and the truth is that if you were to maneuver the table by using only your force, it would be impossible to move it, especially the heavy-duty models that can weigh somewhere over 500 pounds. Nonetheless, most models come with casters that will make repositioning easier.

How much does a motorcycle weigh?
If you own a dirt bike, you will need a lighter table (which is good news as they are cheaper), as these units usually don’t overcome 125 lbs. On the other hand, sport bikes and tourers can weigh between 300 lbs. up to 1,000 lbs., so you will need stronger support for them.

Which material is better: steel or aluminum?
They are both durable and resistant to wear. Nonetheless, if you are going to lift heavy vehicles, steel is always the best option.



Conclusion

Whether you decide to go for a hydraulic or a pneumatic unit, we have you covered, as we have paid great attention to selecting the products and made sure our top includes models with variate functions and prices. They are all built of top-quality materials and able to resist corrosion and rust. Nevertheless, now it’s your turn to make a choice, according to your vehicle size, your preferences, and your budget.

Best Motorcycle Lift Table for Sale: Tuxedo M-1500C-HR

This model offers quality in all aspects, including construction, functionality, and service assurance. It is supplied with many accessories and some pretty nice features. The lifting system is air/hydraulic and has a peak weight capacity of 1,500 lbs, therefore it is suitable for all types of motorcycles, even for the larger models. Besides that, it comes with extensions and an approach ramp that makes it a nice fit even for professional garages.

Editor’s Choice: Black Widow BW-550 Hydraulic

This heavy-duty model arrives with a robust scissor mechanism that is operated by a hydraulic system ready to lift a 1,500-lb. 2-wheel vehicle in just a few seconds. The table surface is made from diamond plate steel, which offers excellent adherence for the tires, and the platform itself is large, allowing it to accommodate bulkier models. To ensure optimal safety conditions, it integrates a front-wheel clamp that locks the front tire and contributes, along with the straps you need to secure around the vehicle, to obtaining better stability while lifting and working on the bike.

Best Motorcycle Lift Table for the Money : Titan Ramps 1,000 lb

Titan is known to produce durable tables with impeccable lift systems that come at a good price, even for buyers who are on a budget. The Titan Ramps 1,000 lb. presents a robust steel structure with a diamond plate platform that allows it to safely lift vehicles weighing up to 1,000 lbs. It comes with handles, so you can easily tie the straps, and integrates a front wheel chock that guarantees the bike will remain as stable as possible during maintenance.

Best Lift Table for Small Motorcycles: Extreme Max 5001.5083

If you’re on the hunt for a more compact model that can easily handle lighter bikes, then we recommend the Extreme Max. You will surely like its design and the reasonable price. It has a small footprint, therefore it won’t take too much space in your garage. The solid structure is covered in resistant red paint that lends it better durability and is sustained by 4 strong casters that allow you to easily move it.

Best Commercial Motorcycle Lift Table: APlusLift AP-MT1500X

A lift table is an outstanding addition to a professional garage, and you will soon see the results in the increased staff productivity. We consider this model to be the best for commercial use, as it is sufficiently large to stand not only motorcycles but ATVs, jet skis, and other vehicles of this type, especially as it presents a peak weight capacity of 1,500 lbs. It is built of heavy-duty steel and actioned by a strong pneumatic mechanism. Furthermore, the powder coat layer offers resistance against rust and corrosion and guarantees its durability.

Best Motorcycle Lift Table for Harley: Black Widow ProLift

Another high-capacity model, it is produced by a renowned name in the industry and is suitable for both home use and professional garages. It is built of heavy-duty steel and features a center jack that extends between 4 and 15 inches. The system is pneumatic and can be easily operated by foot. Apart from being able to lift motorcycles weighing up to 1,500 lbs., it offers a generous work surface as well, therefore you can easily lift a lawnmower or an ATV for inspection and repairs. It is the best pick for working on a Harley Davidson bike due to the generous platform design.

Lexie Thorne
Lexie Thorne
Lexie is the newest member of the team, previously working for a local business that sold, among other items, robotic vacuums. She takes a keen interest in the latest tech and considers herself to be a veritable tech geek. Using her connections, Lexie makes sure that she always talks to experts when putting together reviews and articles to ensure the information you read is reliable and makes a difference toward aiding you to better understand how automated devices for home use work.

By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close